EasyManua.ls Logo

AIMS Power PWRI60012120S - User Manual

AIMS Power PWRI60012120S
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DC TO AC PURE SINE POWER INVERTER
PWRI60012120S
INSTRUCTION MANUAL
ETL Listed to UL 458 & CSA 22.2 Standards
1
Question and Answer IconNeed help?

Do you have a question about the AIMS Power PWRI60012120S and is the answer not in the manual?

Summary

Introduction

Warning and Safety

General Safety Precautions

Follow manual, avoid heat sources, keep flammables away, do not disassemble, service by qualified personnel.

Operational and Health Safety

Use negative ground systems, prevent contact with grounded surfaces, avoid alcohol/drugs, pacemaker caution, ensure ventilation.

Inverter Features

Installation Guidelines

Environmental and Mounting Requirements

Ensure no water access, maintain optimal ambient temperature, and do not mount upside down.

Battery Management

Battery Requirements and Load Calculation

Understand battery voltage, current needs, and calculate load requirements for equipment.

Battery Operating Time and Capacity

Calculate run time based on battery capacity and load, and understand deep cycle usage.

Connection Procedures

Grounding and Battery Terminal Connection

Connect chassis to ground and battery terminals correctly, avoiding polarity reversal.

Using the Power Inverter

Operation and Maintenance

Steps for connecting, powering on/off, fan activation, long-term storage, and USB port usage.

Technical Specifications

Warranty Information

AIMS Power PWRI60012120S Specifications

General IconGeneral
ModelPWRI60012120S
TypePure Sine Wave Inverter
Output Power600 Watts
Input Voltage12 VDC
Output Voltage120 VAC
Output Frequency60 Hz
Efficiency90%
Surge Power1200 Watts
ProtectionsOverload, Over Voltage, Low Voltage, Short Circuit, Over Temperature
CoolingFan Cooled

Related product manuals