EasyManua.ls Logo

AIMS Power SCC60-100A - User Manual

AIMS Power SCC60-100A
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
AIMS Power www.aimscorp.net
Solar Charge Controller
Installation and Operation Manual
SCC60-100A
AIMS POWER
Headquarters
9550 Gateway Drive
Reno, NV 89521
Telephone: (775) 359-6703
Fax: (775) 359-6753
Email:
Sales@aimscorp.net
Techsupport@aimscorp.net
Question and Answer IconNeed help?

Do you have a question about the AIMS Power SCC60-100A and is the answer not in the manual?

Summary

1. Important Safety Instructions

Safety Information and Precautions

Read instructions, no user serviceable parts, disconnect power, mount indoors, use insulated tools, avoid jewelry, battery bank consistency, no smoking.

2. Getting Started

2.3 Features

Controller Component Identification

Lists and describes key components like Heatsink, mounting holes, setting switches, terminals, LCD, and LEDs.

3. Installation

3.1 General Information

Discusses mounting location, enclosure types, parallel installation, and safety precautions.

3.2 Controller Installation

Battery Type and Charging Stages

Power Wire Connection

Connecting Power Wires

Step-by-step guide for connecting solar, battery, and load wires to the controller terminals.

Power-Up and Power-Down

Power-Up Sequence

Steps for powering up the controller, including battery and solar disconnect switch operations.

4. Operation

Battery Charging Stages

4.4 Protections, Faults and Alarms

Controller Protections

Details protections like solar overload, short circuit, and low battery voltage.

System Alarms

Explains common alarms such as high temperature, high input voltage, and current limit.

Inspection and Maintenance

5. Troubleshooting

Battery Charging Issues

Addresses problems like no LCD/LED indications and the controller not charging the battery.

6. Warranty Claim Procedure and Datasheet

Warranty Return and Contact Information

Summary

1. Important Safety Instructions

Safety Information and Precautions

Read instructions, no user serviceable parts, disconnect power, mount indoors, use insulated tools, avoid jewelry, battery bank consistency, no smoking.

2. Getting Started

2.3 Features

Controller Component Identification

Lists and describes key components like Heatsink, mounting holes, setting switches, terminals, LCD, and LEDs.

3. Installation

3.1 General Information

Discusses mounting location, enclosure types, parallel installation, and safety precautions.

3.2 Controller Installation

Battery Type and Charging Stages

Power Wire Connection

Connecting Power Wires

Step-by-step guide for connecting solar, battery, and load wires to the controller terminals.

Power-Up and Power-Down

Power-Up Sequence

Steps for powering up the controller, including battery and solar disconnect switch operations.

4. Operation

Battery Charging Stages

4.4 Protections, Faults and Alarms

Controller Protections

Details protections like solar overload, short circuit, and low battery voltage.

System Alarms

Explains common alarms such as high temperature, high input voltage, and current limit.

Inspection and Maintenance

5. Troubleshooting

Battery Charging Issues

Addresses problems like no LCD/LED indications and the controller not charging the battery.

6. Warranty Claim Procedure and Datasheet

Warranty Return and Contact Information

AIMS Power SCC60-100A Specifications

General IconGeneral
ModelSCC60-100A
TypeSolar Charge Controller
Rated Current60A
Continuous Output Current60A
Peak Output Current100A
Efficiency98%
Peak conversion efficiency98%
Temperature Compensation-3mV/°C/2V (Default)
CoolingFan
Input Voltage12V/24V
Battery Voltage12V/24V
Output Voltage12V/24V
Maximum PV Input Power800W
Protection FeaturesOverload, Short Circuit, Reverse Polarity, Over Temperature
Operating Temperature-20°C ~ +55°C

Related product manuals