Aiphone IS SERIES - Call Transferring Settings

19
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING AND ADJUSTMENT
E
Setting the call transferring [TRANSFER]
You can make the following settings for transferring calls.
Sub item Description Setting range
[CALL
TRANSFER]
Enables (ON) or disables (OFF)
the call transferring.
ON
OFF
[TRANSFER
DESTINA]
(Transfer
destination)
(Available when [CALL
TRANSFER] is set ON.)
(Registering a
master station or
a remote site)
Selects a master station in your
site or a remote site as the
transfer target.
[TRANSFER
DELAY]
(Available when [CALL
TRANSFER] is set ON and the
target is set at [TRANSFER
DESTINA].)
00-60 (sec.)
Sets the time of starting
transferring after a call is received.
[SCHEDULE
TRANSFER]
Enables or disables the call
transferring to be performed
on the schedule preset by the
system settings automatically.
ON
OFF
[SCHEDULE
DESTINA]
(Schedule
destination)
(Available when [SCHEDULE
TRANSFER] is set ON.)
(Registering a
master station or
a remote site)
Selects a master station in your
site or a remote site as the
transfer target on the schedule.
[TELEPHONE
TRANSFER]
Enables (ON) or disables
(OFF) the automatic call
transferring to telephone.
ON
OFF
[SCHEDULE
TEL TRANSFE]
(schedule
telephone
transfer)
Enables or disables the call
transferring to telephone to
perform transferring on the
schedule preset by the System
settings automatically.
ON
OFF
Press
1
repeatedly to select [TRANSFER] (so
that it is highlighted), and then press
ZOOM/WIDE
to select.
The sub items can also be displayed by pressing
*
TRANSFER
in the standby mode.
NOTE:
The above display example differs from the actual one.
Press
2
repeatedly to select the target sub
item (so that it is highlighted), and then press
ZOOM/WIDE
to select.
Make the settings on each sub item as follows.
3
[CALL TRANSFER]:
Press repeatedly to select ON or OFF, and then
press
ZOOM/WIDE
to decide on the selected one.
[TRANSFER DESTINA] (Transfer destination):
This setting is available only when [CALL TRANSFER] is ON.
*
Press repeatedly to select the target master station
in your site or a remote site (so that it is highlighted), and
then press
ZOOM/WIDE
.
The LED on
*
TRANSFER
lights up (red) when [CALL
TRANSFER] is set ON and the target is set at [TRANSFER
DESTINA].
[TRANSFER DELAY]:
This setting is available only when [CALL TRANSFER] is set
*
ON and the target is set at [TRANSFER DESTINA].
Press repeatedly to set the delay time, and then
press
ZOOM/WIDE
to select.
If the delay time is set to “00”, a call will be transferred to the
*
target directly.
[SCHEDULE TRANSFER]:
Press repeatedly to select ON or OFF, and then
press
ZOOM/WIDE
to decide on the selected one.
[SCHEDULE DESTINA] (Schedule destination):
This setting is available only when [SCHEDULE TRANSFER]
*
is ON.
Press to select the target master station in your site
or a remote site (so that it is highlighted), and then press
ZOOM/WIDE
.
Press
*
SETTING
as “BACK” function to return to the
previous screen.
The sub items are displayed.