Aiphone IS SERIES User Manual

31
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING AND ADJUSTMENT
B
Searching for a station in your site by
designating an area [STATIONS BY AREA]
Select [STATIONS BY AREA] either in the standby
1
mode (→P. 28) or the SEARCH LIST. (→P. 29)
Press
2
to select the target area from the list (so
that it is highlighted), and then press
ZOOM/WIDE
to select.
All the stations in the area are displayed in the list.
Press
3
to select the target station (so that it is
highlighted).
You can select up to 5 stations.
*
(→P. 30)
Start calling (talking), monitoring or paging by
4
following the procedure for the corresponding
performance.
(→P. 35-37)
C
Searching for a station in your site by
designating a station type [STATIONS BY TYPE]
Select [STATIONS BY TYPE] from the SEARCH
1
LIST. (→P. 29)
All the station types are displayed in the list.
Press
2
to select the target station type from
the list (so that it is highlighted), and then press
ZOOM/WIDE
to select.
All the stations of the selected type are displayed in the list.
Press
3
to select the target station (so that it is
highlighted).
You can select up to 5 stations.
*
(→P. 30)
Start calling (talking), monitoring or paging by
4
following the procedure for the corresponding
performance.
(→P. 35-37)

Aiphone IS SERIES Specifications

General

Brand	Aiphone
Model	IS SERIES
Category	Intercom System
Language	English