21
Settings and Adjustments
Station programming
4
■ Send Test Email
Send a test email to the address specified in “Email Addresses (→page 19)”.
How to send a test email
1. Click [Send].
2. The following message will be sent to the configured address.
Example of sending an email message:
When sending a test email from this adaptor (Station Number: 002, Station Name: Multi-purpose Adaptor 2).
Source △△△△@△△△△.com
Date and time 11/20/2018 15:22
To
CC
xxxx@xxxxx.com
Subject 002 Multi-purpose Adaptor 2 Test Email
Description Test Email sent at "20181120 15:22:46."
Station Number: [002]
Station Name: [Multi-purpose Adaptor 2]
Important
• "UTF-8" encoding is used for "Subject." Depending on the email client, the characters may appear incorrectly. To avoid this,
set the encoding method to "UTF-8."
To Next Page
Loading...
