113
Settings and Adjustments
Configuring on the station
4
3. Configure the function to assign.
4. Tap [Edit Name].
Entry Description
Call Assign the calling function to the Speed Dial button.
Refer to
“How to assign calling functions to Speed Dial buttons (→page 115)” for information on how to
configure this.
Page Assign the paging function to the Speed Dial button.
Refer to
“How to assign paging functions to Speed Dial buttons (→page 116)” for information on how to
configure this.
Monitor Assign the monitoring or scan monitoring function to the Speed Dial button. Scan monitoring cannot be
assigned unless scan monitoring is configured in
“How to configure Scan Monitoring (→page 101)”.
Refer to
“How to assign monitoring functions to Speed Dial buttons (→page 118)” for information on
how to configure this.
Relay Control Assign optional relay (a function that controls the output terminal of another station) to the Speed Dial
button.
Refer to
“How to assign Relay Control functions to Speed Dial buttons (→page 119)” for information on
how to configure this.
To Next Page
Loading...
