Aiphone IXG Series - Warning Precautions; Caution Precautions

3
Key Input Wait Time [sec] controls how long a user has between key presses when entering a password. If the time is exceeded, they
will need to try again.This only applies when a user is registering their phone with the system by calling the IXGW-TGW directly.
The Internet Connection setting controls what network connections the IXGW-TGW will use. The default option is to use the wired
LAN connection as the primary, with the cellular connection as a backup. The drop-down can be used to congure other settings
instead. Once all settings are congured, click
Save
.
Next, the IXGW-TGW will need to be congured to operate the installed SIM card.
Navigate to Gateway Settings, Gateway SIM Settings. Fill in the following information:
Gateway SIM Settings
Gateway Registration (continued)
APN: iot0723.com.attz
User Name: aiphone
Password: aiphone
Authentiation Type: PAP (default setting, do not change)
APN protocol: IPv4v6 (default setting, do not change)
Network Type: Automatic (default setting, do not change)
There is an option to set a PIN code under PIN Code Settings. This is entirely optional, and doing so will lock the SIM card to the
MAC address of the IXGW-TGW. If a PIN code is needed, set PIN to Enable. A pop up will appear with a warning that this process will
override a PIN code that has already been set on the SIM card, and that entering an incorrect PIN code too many times can lock a SIM
card. Enter the desired PIN code under Code.
Once all settings are congured, click
Save
.
Enabling Phone Calls
Navigate to Site Settings, Units/Stations. For each unit that will have a phone number, set Phone Registration to Enable. Once all
settings are congured, click
Save
.