5
Telephone Entry Settings (continued)
If any settings changes were made under Telephone Entry Settings, upload settings to all stations in Connection(S), Upload Settings
before performing phone registration.
Provide whoever will register the phone with the Gateway Phone Number, their Unit Number, and the Default Password set for that
unit (or the Password, if one has already been generated). The rest of these steps will be from the perspective of the person placing
the call.
Call the Gateway Phone Number. Follow the prompts and select a language from the phone tree; press 1 for English.
Enter the appropriate unit number, followed by #.
Enter the password, followed by #. If prompted, enter a new six digit password, followed by #. Re-enter the new password, followed
again by #.
A message will play indicating that the password was changed. Press 1 to return to the menu, then 1 to register the phone number.
Press 1 again to nish registering the phone number. It is safe to hang up at that point.
Registering Phone Numbers by Telephone
Uploading Settings to Stations
Once all settings have been congured, navigate to Connection(S), Upload Settings, and follow the steps shown in the IXG Quickstart
Guide to upload settings to all stations.
Once phone numbers have been registered to the IXGW-TGW, information can be downloaded to IXG Support Tool or exported by
using the buttons along the top of the screen.
Download Phone Information will import all registered phone numbers on the IXGW-TGW into IXG Suport Tool.
Export Registration PDF will create a PDF listing the methods used to register each phone number.
Backup Phone Information will create a backup of the currently registered phone numbers.
Recover Phone Information allows the registered phone numbers to be restored from a backup.
Backing Up and Downloading Phone Information
To Next Page
Loading...
