- 6 -
How to Install
■ Multi-purpose adaptor IXW-MA installation method
● Perform before installation
1
2
Remove the panel.
Place your finger in depression at the top and pull the
panel toward you.
Remove the mounting bracket.
(1) Loosen the fastening screw on the front of the unit at the bottom.
(2) Slide the mounting bracket down and remove it.
Reattaching the panel
(1) Fit the four clips at the bottom of the panel into the slots on the unit and
then press the top into place.
(2) Press all around the edges of the panel to fit it firmly in place and prevent
any gaps forming
Depression
Unit
Panel
Clips (4 locations)
[Back of panel]
[Front of unit]
Unit
Phillips screwdriver
[Front]
Fastening screw
(cannot be removed)
Tab
Mounting bracket
Slide down
Slot
Slots (4 locations)
Tabs (4 locations)
Mounting bracket
Unit
[Back]
To Next Page
Loading...
