Aiphone MC-60/4A - 5 MOUNTING; Mounting Guidelines

MOUNTING
Mounting guidelines The MC-60/4A is designed for wall or pedestal mounting only.
1. Loosen screw on the bottom of the front case, and remove the unit by
sliding the front case upward from the back chassis, then pull away.
Disconnect the intercom from the back chassis by unplugging the multi-pin
connector. Do not force the unit open. (Set the intercom unit aside while
making wire terminations so as not to mar or scratch the unit.)
2. Install the back chassis to a single gang box or mounting ring, or directly to
the wall.
3. All wiring terminations are done on the back chassis directly onto the
screw terminal section. Designate a color code for wire numbers 1-7, and
connect wires accordingly. Connect all like terminals together with
matching wires.
4. Wiring is done in a daisy-chained method with up to 10 stations on a run.
5. When wiring is completed, reattach the intercom to the back chassis by
plugging in the multi-pin connector. Align from the top and slide downward
into position. Tighten screw at the bottom of the front case.
MC-60/4A
MC-60/4B
★ Install terminal box and cable in
non-trapping manner.
> OPERATIONS---
When an LED at the top of the station is lit, that channel is in use. Select another channel that is not in
use. When any one station has a channel selected, the corresponding LED will be lit on all other
stations. If responding to a call, select the station number that was requested by the person paging.
• Calling
• When being paged
• Conference calling
• Music muting
Select the channel number (1-4). Page & request a
person to join in on a selected channel. Release
PAGE button and wait for reply.
Go to the nearest MC-60/4 station, and select the
channel you were requested on.
Call for up to 2 persons to a conference call on your
selected channel. If more than 3 people join in,
communication volume may be affected.
When a station starts paging, pretone will sound and
the music will be muted. When the page is completed,
the music will return.
★ Firmly depress channel number button in every operation.
Depress
Release
- 5 -