What to do if AIPTEK AHD H23 Camcorder files on the memory card do not display smoothly?
If the LCD shows a “!” marking and the files on the memory card don't display smoothly, this could be due to a low-speed SD card or incorrect content. To resolve this, format the SD card using the AIPTEK Camcorder instead of a PC. Alternatively, use a high-speed SD/SDHC/SDXC card.
Why is the lash not working on my AIPTEK Camcorder?
If the lash on your AIPTEK Camcorder isn't working, it could be due to a few reasons. First, check the battery power and replace or recharge it if it's low. Another possibility is that the camcorder is in DC power mode; if so, switch to battery power mode. Also, in lash auto mode, the camcorder lash only activates when necessary, such as in dark settings.
General| Video Resolution | 1920 x 1080 |
|---|---|
| Sensor Type | CMOS |
| Touchscreen | No |
| Microphone | Yes |
| Speaker | Yes |
| HDMI | Yes |
| USB | Yes |
| Battery Type | Lithium-Ion |
| Focus Adjustment | Auto |
| Display Size | 3.0 inch |
| White Balance | Auto, Cloudy, Daylight, Fluorescent |
| Scene Modes | Portrait, Landscape, Sports, Night, Beach, Snow, Sunset, Fireworks |
| Storage | SD/SDHC |
To Next Page