Plug in your unit and press the fan
button
.
Your Table-Top is fully assembled and
needs no additional set-up.
Put your Table-Top in the most centrally-located
room of your home. It should be on a level surface
against an interior wall. Make sure it’s at least two
inches from the wall so the humidistat (on the cord)
can accurately read your humidity.
5
3
2
Fill your water bottle, then screw the
cap back on, making sure the cap is
correctly threaded. Your Table-Top holds 2
gallons of water.
Put the water bottle in the base. Wait
20 minutes for the wick to become
fully saturated, then proceed to step 5.
4
More about positioning:
• To maximize humidity circulation, put your unit near a cold air return.
• If you prefer to put your unit in the room where humidity is most
needed, you can! But the humidity won’t circulate as well with this
method.
• Don’t put your humidifier under a window, as condensation may
occur.
• Put the unit on the bottom floor of a multi-story home.
About water additives:
• Do not use essential oils in your Table-Top.
• Do not use water softeners.
• We recommend our Essick Air Bacteriostat to help inhibit
mold growth.
To Next Page
Loading...
