Airo SF series - 5.4 Machine Start-up Procedures

Use and maintenance manual Self-propelled aerial platforms Page 8
1.6 Identification
In order to identify the machine, when spare parts and service are required, always mention the information given in the serial
number plate. Should this plate (as well as the various stickers applied on the unit) be lost or illegible, it is to be replaced as
soon as possible. In order to identify the machine when no plate is available the serial number is also stamped on the chassis.
To locate the plate and the stamp of the serial number, see the following picture. The main data of the machine to which this
book refers are indicated in the following boxes:
Model.................................………….. Chassis:..................................………... Year:...................................…………...
Fig.1