AIROS 8 - Operating Instructions - Data and Reset; Usage Data Screen; Reset to Default Settings

16
Operating Instructions (continued)
3.8 If you select FOCAL THERAPY, refer to 3.6 before
continuing.
If you select CLEARING THERAPY, refer to 3.7 before
continuing.
If you do not wish to run an LPT Mode option, scroll to OFF.
Press SELECT to conrm. The LPT MODE setting will be
updated and stop blinking.
To begin treatment therapy, press UP  or DOWN  to
scroll to BEGIN TREATMENT. NOTE: If this is the rst time
the device is being used, you may be asked to select the
number of sleeves to be used for therapy. Refer to 3.2 for
additional instructions.
If this is not the rst time the device is being used, you may
not be asked to select the number of sleeves. Treatment will
begin immediately.
3.9 USAGE DATA SCREEN This screen shows the amount of total time the device has
been in used.
To go back to the MAIN MENU SCREEN, press UP  or
DOWN  to scroll to BACK TO MAIN MENU. Press SELECT
to conrm.
3.10 RESET TO DEFAULT SCREEN To reset the device to the Factory Default settings, press UP
 or DOWN  to scroll to RESET TO FACTORY DEFAULT
SETTINGS. Press SELECT to conrm.
To cancel and return to the MAIN MENU SCREEN, press
UP  or DOWN  to scroll to CANCEL. Press SELECT to
conrm.
TOTAL USAGE TIME
HOURS: 0
MINUTES: 0
 BACK TO MAIN MENU
 RESET TO FACTORY
DEFAULT SETTINGS
CANCEL