Workhorse-8 Instruction Manual 17
AirSep Corporation
7.0 Service Parts
Service parts listed below can be obtained directly from AirSep. Tubing can
generally be obtained locally; specications are listed below. Always replace tubing
with equal or better specications. Other parts are not considered regular service
items. Please contact AirSep directly for further information on other parts.
7.1 SERVICE PARTS
Description Part Number Quantity
ATF Module, 120 V/220 V, 60 Hz 1265V-SEQ 1
ATF Module, 220 V, 50 Hz 7465V-SEQ 1
Compressor 120 V/60 Hz 7329-SEQ 1
Compressor Rebuild Kit
(for 120 V, 60 Hz or 220 V, 50 Hz)
7366-SEQ 1
Compressor 220 V/50 Hz 7330-SEQ 1
Compressor 230 V/60 Hz 1619-SEQ 1
Compressor Rebuild Kit (for 220 V, 60 Hz) 3197-SEQ 1
Cylinder Walls (aka Cylinder Sleeves) for
220 V, 60 Hz compressor (if needed)
3411-SEQ 2
Compressor Inlet Filter 3308-SEQ 1
Compressor Inlet Filter Element 3309-SEQ 1
Pressure Relief Valve 1368-SEQ 1
Vibration Mount 3548-SEQ 4
Oxygen Monitor, 120 V 7393-3-SEQ 1
Oxygen Monitor, 220 V 7393-4-SEQ 1
Compressor Discharge Pressure
(compressed air) Test Kit
7389-SEQ 1 1
Table 7.1: Workhorse-8 Service Parts
To Next Page
Loading...
Need help?
General
