18 Workhorse-8 Instruction Manual
AirSep Corporation
7.2 REPLACEMENT TUBING
Tube Size (ID x OD) Construction
Max. Working
Pressure (psig)
Temperature
Range (°F)
½” x
7
⁄8” Reinforced Silicone 141 -40 to 175
¼” x ½” PVC 70 -40 to 175
½” ID x 10’ Hose part number 9155-SEQ
¼” ID x 10’ Hose part number 9160-SEQ
Table 7.2: Replacement Tubing
7.3 TECHNICAL SUPPORT
For assistance in troubleshooting or repairing the unit, or to order replacement parts,
contact the AirSep Commercial Products Service Department by telephone. In the
USA or Canada, call 1-800-320-0303. Outside the USA or Canada, call (716) 691-
0202. Send fax inquiries anytime to (716) 564-2717. Address written inquiries to:
AirSep Corporation
260 Creekside Drive
Buffalo, NY 14228-2075
USA
Attention: Commercial Products Service Department
E-mail: info@airsep.com
Visit www.airsepcpd.com to know about our complete range of standard Oxygen
Generators.
To Next Page
Loading...
Need help?
General
