AIRTEK ACentre-20 User Manual V3.2
General safety guide
This equipment must only be operated by qualified technicians.
Read instruction manual carefully before operating this equipment. If there is anything you do not fully understand,
please contact your distributor or manufacturer. We like to help.
The refrigerant storage cylinder contains liquid refrigerant under high pressure. Overfilling of the storage cylinder may
cause violent explosion. Do not disable the overfill safety protection of this machine. Always keep the cylinder on the
load cell platform whenever the machine is operating.
Only use cylinder which is supplied with this equipment or recommended by the manufacturer.
Always use this machine in a well-ventilated area, avoid inhaling refrigerant and/or oil vapors, always read material
safety instructions of refrigerant and oil packaging, for related warning and care.
Under any circumstances that fan is stopped, the machine will be powered off.
Always switch off the machine and disconnect power cable before removing any covers or servicing this machine, to
avoid electric shock which can be fatal.
Never use compressed air to test for leaks on vehicle or this equipment!
Wear safety goggles and gloves, to protect eyes and skin from contact with refrigerant. Liquid refrigerant when it
comes in contact with the human skin or eyes will cause frostbite and/or blindness. If accidental contact is made with
eyes or skin, wash the affected area with plenty of fresh water immediately and contact a doctor if required.
Avoid using the machine in very hot or flammable areas.
Store the machine in a well-ventilated cool area when not in use.
Avoid using extension power cable thinner than 1.5mm
2
(10amp current carrying capacity).
Keep gasoline or other flammable substances away from the equipment.
Once a leak is detected in the unit, switch off the equipment by pressing the Emergency stop button and contact your
distributor or service dealer.
CAUTION-SHALL BE OPERATED BY QUALIFIED PERSONNEL
To Next Page
Loading...
