Airwell AWSI-DAV009-N11 User Manual

Flow Logic II series multiple air conditioning
systems adopt the consistent running mode,
by which, all indoor units can only be heating
or refrigerating operation at the same time.
To protect the compressor, the air
conditioning unit should be powered on for
over 12 hours before using it.
All indoor units of the same refrigerating
system should use the unified power switch
to ensure that all indoor units are in the
state of being powered on at the same time
during the operation of air conditioner.
Your air conditioner may be subject to any
change owing to the improvement of Airwell
products.
Contents
whole model brief model
AWSI-DAV009-N11 DAV009
The brief model is used in this manual for above
models.
cooling
dry
heating
indoor
outdoor
indoor
outdoor
max.
min.
max.
min.
max.
min.
max.
min.
DB: 32
WB: 15.5
DB: 18
DB: 43
DB: -5
DB: 27
DB: 15
DB: 21
DB: -15
WB: 23
WB: 14
WB: 26
Operating Range of Air Conditioner
AWSI-DAV012-N11 DAV012
AWSI-DAV016-N11 DAV016
User Manual
Parts and Functions
1-5
Safety Considerations
6-7
17
Fault Checkup
18-23
Installation Procedures
24-29
Electrical Wiring
30
Functions of Wired Controller
32
Disposal
8-15
Operation instruction
16
Maintenance
Product Features:
Low static pressure air conditioners for
the indoor units of this series;
The built-in installation to save space;
Automatic display of fault detection;
Central control function (optional from
our company);
The air conditioner is provided with the
function of compensation for power
supply. During operation, when the power
supply fails emergently and resumes
again, the air conditioner returns to the
working condition before power failure,
if provided with compensation function.
Now this indoor unit only has wired
controller function, the indoor unit that
has remote controller function need to
set in factory especially.
1.
2.
3.
4.
5.
6.
31
Test Run & Fault Code

Airwell AWSI-DAV009-N11 Specifications

General

Brand	Airwell
Model	AWSI-DAV009-N11
Category	Air Conditioner
Language	English