Need help?Do you have a question about the Airwell AWSI-HDDE024-H11 and is the answer not in the manual?
General| Refrigerant | R32 |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Coefficient of Performance (COP) | 3.61 |
| Indoor Unit Noise Level | 24 dB |
Overview of the HDDE series air conditioner and its technology.
Lists the main technological innovations and benefits of the unit.
Details the components and features of the wall-mounted indoor unit.
Explains the microprocessor and remote control system for operation.
Describes the installation and features of the outdoor units.
Covers the matching table for unit combinations and inbox documentation.
Detailed specifications for the indoor unit, including capacity and dimensions.
Detailed specifications for the outdoor unit, including capacity and dimensions.
Technical data specific to the HDDE012 model.
Technical data specific to the HDDE018 model.
Technical data specific to the HDDE024 model.
Specifies the standard conditions for cooling and heating performance ratings.
Defines the minimum and maximum operating temperatures for cooling and heating.
Provides dimensional drawings and specifications for indoor units.
Provides dimensional drawings for outdoor units YDDE009 and YDDE012.
Provides dimensional drawings for outdoor units YDDE018 and YDDE024.
Illustrates methods for measuring sound pressure levels for different unit types.
Details power supply, current, breaker ratings, and wiring for models.
Wiring schematics for HDDE009, HDDE012, HDDE018, HDDE024 indoor units.
Wiring schematics for YDDE009, YDDE012, YDDE018, YDDE024 outdoor units.
Illustrates the refrigerant flow for different indoor/outdoor unit combinations.
Details tube bending, torque values, and oil trap requirements for connections.
Explains abbreviations and the master/slave operation concept for control.
Describes PI scheme, P control, I control, and frequency management.
Explains fan speed determination for cooling/heating and auto-fan settings.
Details unit behavior in Cool, Heat, and Dry modes based on temperature.
Describes the Sleep and I-Feel functions for enhanced comfort and energy saving.
Covers defrost protection and compressor/coil overheating protections.
Details protections for compressor current, outdoor coil overheating, and deicing.
Explains protections for AC voltage drop, communication errors, and sensor failures.
Explains how the ON/OFF button controls auto mode and fan speed.
Describes the function of the unit's display, LEDs, and buttons.
Safety precautions for inspection and repair of electrical/control systems.
Lists error codes, LED indicators, and corresponding causes for malfunctions.
Guides for checking mains voltage, power input, fan motor, compressor, and reverse valve.
Graphs showing resistance vs. temperature for RAT, OAT, ICT, OCT, and CTT sensors.
Exploded diagrams and spare parts lists for HDDE009, HDDE012, HDDE018, HDDE024 indoor units.
Exploded diagrams and spare parts lists for YDDE009, YDDE012, YDDE018, YDDE024 outdoor units.
To Next Page