To Next PageTo Next PageWhy is there no feedback from the indoor motor in my Airwell AWSI-HHF012-H11 Air Conditioner?
If you're experiencing no feedback from the indoor motor of your Airwell Air Conditioner, it could be due to the following reasons: * The IFAN motor is damaged. * The IFAN motor is blocked. * There's an issue with the IDU PCB.
What causes zero-crossing protection in my Airwell AWSI-HHF012-H11 (IDU)?
Zero-crossing protection activation in your Airwell Air Conditioner (IDU) can occur because: * The IFAN motor is damaged. * The zero-crossing circuit on the IDU PCB is damaged.
What causes malfunction protection of jumper cap in Airwell Air Conditioner?
Malfunction protection of the jumper cap in your Airwell Air Conditioner is caused by a poor connection of the jumper on the indoor PCB.
Key technological innovations and benefits of the air conditioner units.
Defines the operating temperature and voltage limits for cooling and heating.
Cooling and heating capacity data for specific models.
Cooling and heating capacity data for specific models.
Cooling and heating capacity data for specific models.
Cooling and heating capacity data for specific models.
Wiring diagram for HGF009/HHF009/YGF009 models.
Wiring diagram for HGF012/HGF012/YGF012 models.
Wiring diagram for HGF018/HHF018/YGF018 models.
Wiring diagram for HGF024/HHF024/YGF024 models.
Details on system operation, compressor, fan control, and outdoor fan.
Explains Fan, Cool, Heat, Auto, and Dry operating modes.
System protection functions like defrost and over-current.
Guidance on diagnosing electrical and control issues.
Steps to check main components like voltage, compressor, and fan.
General| Type | Split System |
|---|---|
| Cooling Capacity | 12000 BTU/h |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.21 |
| Air Flow (Indoor Unit) | 500 m³/h |
| Weight (Indoor Unit) | 8.5 kg |
