To Next PageTo Next PageWhy is there no feedback from the indoor motor in my Airwell AWSI-HHF018-H11 Air Conditioner?
If you're experiencing no feedback from the indoor motor of your Airwell Air Conditioner, it could be due to the following reasons: * The IFAN motor is damaged. * The IFAN motor is blocked. * There's an issue with the IDU PCB.
What causes zero-crossing protection in my Airwell Air Conditioner (IDU)?
Zero-crossing protection activation in your Airwell Air Conditioner (IDU) can occur because: * The IFAN motor is damaged. * The zero-crossing circuit on the IDU PCB is damaged.
What causes malfunction protection of jumper cap in Airwell AWSI-HHF018-H11?
Malfunction protection of the jumper cap in your Airwell Air Conditioner is caused by a poor connection of the jumper on the indoor PCB.
General| Type | Split System |
|---|---|
| Cooling Capacity | 5.0 kW |
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Noise Level (Indoor Unit) | 42 dB(A) |
Detailed specifications for HGF009, HHF009, and YGF009 models, including performance and electrical data.
Detailed specifications for HGF012, HHF012, and YGF012 models, including performance and electrical data.
Detailed specifications for HGF018, HHF018, and YGF018 models, including performance and electrical data.
Detailed specifications for HGF024, HHF024, and YGF024 models, including performance and electrical data.
Defines the operational temperature and voltage ranges for the unit.
Presents cooling and heating capacity data for HGF009, HHF009, YGF009 models.
Presents cooling and heating capacity data for HGF012, HHF012, YGF012 models.
Presents cooling capacity data for HGF018, HHF018, YGF018 models.
Presents cooling capacity data for HGF024, HHF024, YGF024 models.
Details power supply, current, circuit breaker, and cable specifications for each model.
Illustrates the electrical connections for HGF009, HHF009, and YGF009 units.
Illustrates the electrical connections for HGF012, HHF012, and YGF012 units.
Illustrates the electrical connections for HGF018, HHF018, and YGF018 units.
Illustrates the electrical connections for HGF024, HHF024, and YGF024 units.
Shows the flow of refrigerant through the indoor and outdoor units during operation.
Explains the electronic control system and lists abbreviations used in the manual.
Details various protection mechanisms including defrost and over-current.
Covers precautions and procedures for troubleshooting electrical and control issues.
