22
Indication on
master unit
Indication on wired
controller
Flash times of LED5 on
indoor PCB/timer LED
on remote receiver
Failure code denition
01 01 1 Indoor ambient temp. sensor Ta failure
02 02 2 Indoor coil temp. sensor Tc1 failure
03 03 3 Indoor coil temp. sensor Tc2 failure
04 04 4 Indoor TW sensor failure
05 05 5 Indoor EEPROM failure
06 06 6 Communication between indoor and outdoor failure
07 07 7 Communication between indoor and wired controller failure
08 08 8 Indoor drainage failure
09 09 9 Indoor repeated address
0A 0A 10 Indoor repeated central control address
Outdoor
failure code
Outdoor failure
code
20 Outdoor corresponding failure
Indoor failure code list
Failure code
To Next Page
Loading...
Need help?
General
