Why is my Airwell PNX009 Air Conditioner working in the wrong mode?
If your Airwell Air Conditioner is working in the wrong mode (cooling instead of heating, or vice versa), it could be due to electronics or RV problems. Check RV.
Why does the Airwell PNX009 Air Conditioner indoor fan work when the unit is off?
If the indoor fan of your Airwell Air Conditioner works when the unit is off, and the fan speed isn't changing with the remote, there may be a controller problem. Replace the controller.
What to do if Airwell PNX009 Air Conditioner compressor motor is noisy but there is no suction?
If the compressor motor of your Airwell Air Conditioner is generating noise but there is no suction, the phase order to the compressor might be wrong. Check the compressor phase order.
Why are not all Airwell PNX009 Air Conditioner units operating?
If not all Airwell Air Conditioner units are operating, there may be communication problems. Check diagnostics.
How to fix Airwell PNX009 Air Conditioner outdoor unit freezing in heat mode?
To resolve freezing of the outdoor unit in heat mode with ice blockage, connect the base heater.
General| Type | Split System |
|---|---|
| Cooling power | 2.6 kW |
| Cooling Capacity | 9000 BTU/h |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 8.5 kg |
| Power Supply | 220-240V/50Hz |
Technical specifications for the YAZ3 24 DCI outdoor unit.
Technical specifications for the QUATTRO YAZ4 30 DCI outdoor unit.
Detailed specifications for various indoor units including PNX, CK, SX, DLF, XLF, DLS, PRIME, HAD series.
Cooling/heating performance for YAZ3 24 DCI with various indoor unit combinations.
Cooling/heating performance for YAZ4 30 DCI with various indoor unit combinations.
Detailed wiring diagram for YAZ3 24 and YAZ4 30 DCI outdoor units.
Describes how to access and perform the installation test, including fault interpretation.
Common system failures, probable causes, and recommended corrective actions.
To Next Page