AIR DIRECTION OPERATION
Press button (8) to activate the supply air flap to auto swing.
Press button (9) to activate the Horizontal Air Flow to auto swing.
Press the two button again, you will cancel auto swing function.
CURRENT CLOCK TIME SET
Clock setting is performed when batteries are inserted. The remote control
displays the setting and the clock display will blink "0:00" or "12:00" AM
(AM sign will blink, too) till a new time is set. For clock setting, use
buttons (5) and (6) for setting the hours and minutes, respectively, and
then press timer SET button (19). The clock setting can be also performed
by pressing timer SET button (19) for 5 seconds.
The clock display will blink, for new setting follow the steps described
above.
TURNING OFF THE AIR CONDITIONER
Press ON / OFF button (1) to turn off the air conditioner. Indicator (C) on
the air conditioner will turn red. Indicating that the air conditioner is in
STAND-BY mode and ready to accept any new command from the remote
control. The remote control LCD will display the clock time. The last
operating set-up will be kept for the next operation.
LOCK FUNCTION
By pressing SPEED button (4) ans SLEEP button (7) at the same time.
The remote control will lock the last operation program. All the function
buttons will be inoperative, including START/STOPbutton. By pressing
the two buttons again the remote control will be released from its locked
position. When lock mode is functioning, the transmission sign(20) will be
on.
ON - UNIT OPERATION
If the air conditioner can not be operated by the Remote Control unit, it
can be turned on for cooling or heating, or completely turned off, by press
MODE button (L) on the air conditioner. The MODE button will change the
operating status of the unit between - COOLING - HEATING - STAND BY
positions, every time it is pressed. Indicators (I), (K), or (G) will light up
respectively, to indicate in which mode the air conditioner operates.
On units for Cooling only, do not set MODE switch on HEAT position.
1
2
I
J
K
L
M
9
To Next Page
Loading...
Need help?
General
