- 20 -
1. Handlebar
2. Human-Machine Interface (HMI)
3. Motor
4. Scooter Stem
5. Saddle
To get started, adjust the scooter stem of Airwheel A3 to the
upright position. Power on the unit before turning on the remote
control, and you'll hear a beep prompt to indicate that the unit is
ready to use. Put feet on the pedals and start to ride.
In case the scooter stem is biased severely to one side, this
indicates Airwheel A3 is not ready to use. Get the unit in proper
gyro-balanced state before getting on.
(See 9.1)
5. Usage
5.1 Components 5.2 Get Started
1. Open the power switch 2. Open remote control
Enter into riding state
To Next Page
Loading...
