www.airwheel.net
Airwheel
Intelligent Pioneer
- 04 -
2. Installation
2.1 Unpack
After receiving the package, hold the two clasps and place the box vertically on the ground. Open the box and make sure the foam box inside is
placed with the Top side upwards. Open the small cover to take out user manual and charger, then open the big cover to take out the scooter stem.
When taking out the scooter stem, lift it firstly to the height of the scooter body, then move it horizontally through the clasp area. Take out the saddle and
then lift up the foam box. Pull the scooter body carefully towards the ground. When the scooter body tilts to a certain angle, it will roll out.
Charger
Scooter stem
Saddle
Scooter body
TOP symbol
User manual
Clasp
Clasp area
TOP
The box includes three main parts: scooter body, scooter stem and saddle. Please follow the
above steps when unpacking so as to avoid potential injuries caused by improper operation.
Given the weight of the scooter body, please lift it upward with care. Better find someone for
necessary help. Please pay attention to the front and rear end of the scooter body, and do not
lift it by the fenders, otherwise your fingers may be caught.
To Next Page
Loading...
Need help?
General
