10
EN
The system allows you to associate more than one control
output to a zone if needed. It is therefore possible to manage
several control outputs from a single thermostat.
Master: Allows the control of
all installation parameters.
Zone: Only allows the control
of the zone parameters.
*Stages to be controlled:
• Air
• Radiant
• Combined
Finish the process, access
the advanced settings
and/or activate the *basic
function (the latter allows
on/off, speed setting,
operation mode setting and
temperature setting).
*Not available on 3.5.0 or later version AZCE6THINKR
To Next Page
Loading...
