Need help?Do you have a question about the Aiwa AD-6900E and is the answer not in the manual?
General| Type | Cassette Deck |
|---|---|
| Track System | 4-track, 2-channel stereo |
| Tape Speed | 4.76 cm/s |
| Total Harmonic Distortion | 0.8% |
| Channels | 2 |
| Number of Heads | 3 |
| Heads | 3 |
| Motor | DC motor |
| Tape Type | CrO2, Metal |
| Output | Line Out |
| Inputs | Line In, Mic In |
| Outputs | Line Out |
| Frequency Response | 20Hz - 18kHz (Metal Tape) |
Covers dimensions, weight, tape system, speed, and stop functions.
Includes frequency response, output levels, noise, and separation.
Details motors, heads, and torque values.
Covers MIC, LINE IN, DIN, PHONES, and LINE OUT levels.
Specifies power source and consumption.
Licensing and trademark details for Dolby NR.
Steps to remove the top and front panels.
Procedures for removing cassette lid, blinder, and plate.
Instructions for removing the Record/Playback circuit board.
Steps to remove System Logic, Key Logic, and FRTS boards.
Steps to remove front panel B and switch boards.
Steps to detach the main mechanical assembly.
Visual guide to identify internal parts.
Lists parts for the front panel and cassette lid/plate.
Lists chassis, cabinet, screws, and nuts.
Lists various control knobs and labels.
Visual identification of various circuit boards.
Lists volume controls, selector parts, and switches.
Lists panels, cords, and circuit board holders.
Visual identification of mechanism parts.
Lists parts for eject, cassette box, and heads.
Lists parts for actuating, play idlers, and brake mechanisms.
Lists motor, flywheel, and related parts.
Visual identification of motors and plungers.
Lists components for REC/PB, Peak Meter, and Volume Control boards.
Lists components for various logic, control, and interface boards.
Lists various other electrical parts.
Shows audio levels for playback modes.
Shows audio levels for recording modes.
Lists parts for cassette pressure and rec-blocking.
Lists plunger, lever, and play idler components.
Lists motor pulleys, flywheel, and brake parts.
Lists various screws, connectors, and cords.
Lists manuals, guarantee cards, and packing materials.
Wiring and schematic for REC/PB board.
Schematics for Key Logic and System Logic boards.
Schematics for control and interface boards.
Schematics for functional circuit boards.
Interconnections for Player Sync, System Logic, REC/PB, Key Logic, and FRTS.
Procedures for bias trap and playback level settings.
Procedures for frequency response and Dolby trap adjustments.
Procedures for LH and CrO₂ bias current adjustments.
Wiring details for control and logic boards.
Wiring for remote control and switch boards.
Wiring for main motor and logic boards.
Wiring for plunger logic and REC/PB board.
Wiring for various signal processing and motor control boards.
Wiring connections for the System Logic board.
Procedures for adjusting peak meter, offset, and VU meter.
Procedures for FRTS, 400Hz Osc, 8kHz Osc, and 400Hz/8kHz Balance.
Lists parts for cassette pressure and rec-blocking.
Lists plunger, lever, and play idler components.
Lists motor pulleys, flywheel, and brake parts.
Detailed list of various screws, connectors, and cords.
Lists manuals, guarantee cards, and packing materials.
To Next Page
