Need help?Do you have a question about the Aiwa AD-F660 and is the answer not in the manual?
Adjusts the frequency response for playback.
Adjusts playback output level to a reference value.
Adjusts the bias oscillator frequency to 85kHz.
Adjusts the Dolby HX circuit for optimal performance.
Adjusts CrO2 recording/playback frequency response.
Adjusts CrO2 recording sensitivity to a reference level.
General| Type | Cassette Deck |
|---|---|
| Track System | 4-Track, 2-Channel Stereo |
| Motor | DC Servo Motor |
| Tape Speed | 4.8 cm/s |
| Tape Type | CrO2, Metal |
| Noise Reduction | Dolby B |
| Frequency Response | 20 Hz - 20 kHz |
| Input | Line In |
| Dimensions | 430 x 125 x 290 mm |
| Power Supply | AC 50/60Hz |
| Inputs | Line Input |
| Outputs | Line Output |
| Output | Line Out |
To Next Page
