Setting Up
27
GB
Setting Up
Choosing the power sources
You can use the AC power or batteries as a power source.
AC IN3 Battery compartment
1 to a wall outlet
1 Connecting the AC power cord
Insert one end of the supplied AC
power cord to the AC IN socket located
at the rear of the player, and the other
end to the wall outlet.
Changing the AM tuning interval
The AM tuning interval is preset to
9 kHz at the factory.
If you need to change the AM tuning
interval, do the following:
1 Set the function switch to RADIO.
2 Press BAND/AUTO PRESET repeatedly
to select AM.
3 Hold down DISPLAY/ENTER for 2
seconds until the preset number start
flashing.
4 Hold down BAND/AUTO PRESET for 2
seconds until “AM 9” or “AM 10”
appears in the display.
5 Press . or > to select “AM 9” for 9
kHz interval or “AM 10” for 10 kHz
interval.
6 Press DISPLAY/ENTER.
After changing the tuning interval, you need
to reset your preset radio stations.
2 Inserting batteries into the remote
Insert two R6 (size AA) batteries (not
supplied).
Replacing batteries
With normal use, the batteries should last for
about six months. When the remote no
longer operates the player, replace all the
batteries with new ones.
continued
To Next Page
Loading...
Need help?
General
