Aiwa CSD-EL33 - Presetting Stations; Station Tuning and Preset Clearing

PRESETTING STATIONS
RADIO/BAND
0-9,+10
<>
BAND
>
_
<4 >> Til
You can preset up to 15 stations in each band. Whena
station is stored, a preset number is assigned to the station.
Use the preset number to tune in to a preset station directly.
7 Press the RADIO/BAND button on the main unit
or the BAND button on the remote control to
select a band. Then, press the << or >>
button to select a station.
2 Press the II button to store the station.
A station is assigned a preset number, beginning from 1
in consecutive order for each band.
Frequency
Preset number
3 Repeat steps 1 and 2.
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
17 Press the RADIO/BAND button on the main unit
or the BAND button on the remote control to
select a band.
2 Press the numbered buttons to select a preset
number.
Example:
To select preset number 15, press the +10 and 5
buttons.
To select preset number 10, press the +10 andO
buttons.
Another method to select a preset number
Press the RADIO/BAND button to select a band. Then, press
the <{> button (or the B bution) repeatedly.
Each time the button is pressed, the next ascending number
is selected.
To clear a preset station
Select the preset station to be cleared. Then, press the Ml
button, and press the Il button within 4 seconds.
The preset numbers of all other stations in the band with
higher numbers are also decreased by one.
W«GLIsH 9