Aiwa HV-E212 - Page 14

11. “Cylinder ASSY” Removal (See Figure ~ 10)
1) Remove the “Front Loading ASSY”.
2) Pull out the “RELAY C. B-5” from the “Cylinder Motor TM85.”
3) Remove 1 screw @) and take off the “Drum Earth’.
4) Remove 3 screws (B)) and take off the “Cylinder ASSY”.
= Remarks =
Take off the “Cylinder ASSY” carefully without any damage.
Drum Earth
Cylinder Motor TM85
Cylinder ASSY
RELAY C.B -5
Fig.-10