14
En
TUNER OPERATIONS
POWER
ENTER
PRESET
MULTI JOG
TUNER/
BAND
CLEAR
BAND
CLEAR
ENTER
1–0/10,
+10
TUNER
MODE
SHIFT
PAUSE/SET
PTY
Manual tuning
1
Press TUNER/BAND (SHIFT+BAND on the
remote) repeatedly to select a band (FM or AM).
2
Press f or g to tune in to a station.
"TUNE" appears when a station is tuned in.
"1" lights up for FM stereo reception.
To search for a station automatically (Auto Search)
Hold down f or g.
The unit searches for a station up or down the band and stops
at reception.
To stop the search manually, press f or g.
•Auto Search may not stop at stations with weak signals.
Preset tuning
Preset your favorite stations and tune them in directly.
Presetting stations
1
Press TUNER/BAND to select a band.
2
Press f or g to tune in to the desired
station.
3
Press ENTER (or a PAUSE/SET on the unit) to
store the station.
The preset number, beginning from "1", appears in the
display.
4
Repeat step 1 to 3 to preset other stations.
•You cannot store more than a total of 32 preset stations.
"FULL" appears.
Tuning in to preset stations
On the unit
1
Press TUNER/BAND to select a band.
2
Press cPRESET repeatedly or turn MULTI JOG.
With each press, the station with the succeeding preset
number is tuned in.
On the remote
1
Press SHIFT+BAND to select a band.
2
Press the numbered buttons for the preset
number of your desired station.
-To select preset number 10, press 0/10.
-To select preset number 15, press +10 and 5.
-To select preset number 20, press +10, +10 and 0/10.
• Pressing r or t repeatedly can also select the
preset number.
To clear a preset station
1Tune in to the station by preset tuning.
2 Press sCLEAR on the unit (CLEAR on the remote), then
press ENTER within 6 seconds.
Preset numbers of preset stations in the band with higher
numbers decrease by one.
To Next Page
Loading...
