12
En
RADIO OPERATIONS
Manual tuning
1
Press TUNER/BAND (BAND on the remote
control) repeatedly to select a band (FM or AM.)
2
Press f or g to tune in to a station.
"TUNE" is displayed when a station is tuned in.
"1" lights up for FM stereo reception.
To search for a station automatically (Auto Search)
Hold down f or g.
The unit searches for a station up or down the band and stops
at reception.
To stop the search manually, press f or g.
•Auto Search may not stop at stations with weak signals.
Preset tuning
Preset your favorite stations and tune them in directly.
Presetting stations
1
Press TUNER/BAND to select a band.
2
Press f or g to tune in to the desired
station.
3
Press aSET to store the station.
The preset number, beginning from "1", appears on the
display.
4
Repeat step 1 to 3 to preset other stations.
•You cannot store more than a total of 32 preset stations.
"FULL" is displayed.
Tuning in to preset stations
On the unit
1
Press TUNER/BAND to select a band.
2
Press cPRESET repeatedly or turn MULTI JOG.
With each press, the station with the succeeding preset
number is tuned in.
On the remote control
1
Press BAND to select a band.
2
Press the numbered buttons for the preset
number of your desired station.
-To select preset number 20, press +10, +10 and 0.
-To select preset number 15, press +10 and 5.
• Pressing PRESET N,M or c repeatedly can
also select the preset number.
To clear a preset station
1Tune in to the station by preset tuning.
2 Press sCLEAR, then press aSET within 4 seconds.
Preset numbers of preset stations in the band with higher
numbers decrease by one.
To Next Page
Loading...
