Aiwa NSX-DS50 - Page 5

Connect the front speakers.
Connect the right front speaker to the FRONT SPEAKERS
R terminals and the left to the FRONT SPEAKERS L
terminals. The speaker cords with the white stripes go to
the @ terminals.
Connect the surround speakers.
Connect each surround speaker cord to the SURROUND
SPEAKERS R jack or the SURROUND SPEAKERS L jack.
Connect the center speaker.
Connect the center speaker cord to the CENTER SPEAKER
jack.
Connect the subwoofer (only for NSX-DS55).
Connect the subwoofer cord to the SUB WOOFER jack.
© Refer to the Operating Instructions of TS-WME6 for the
details.
G
UB
wi02
F
5 Connect the supplied antennas.
Connect the FM antenna to the FM 75 Q terminals and
the AM antenna to the AM LOOP terminals.
Connect the video equipment (DVD player,
player, video tape player, etc.).
Ifthe video equipment has an OPTICAL OUT jack:
Remove the dust cap @ from the DIGITAL IN (PCM/
DOLBY DIGITAL) OPTICAL (VIDEO/AUX/DVD) jack of this
unit. Then, connect the OPTICAL OUT jack to the DIGITAL
IN (PCM/DOLBY DIGITAL) OPTICAL (VIDEO/AUX/DVD)
jack with an optional optical connecting cord.
To activate the spectrum analyzer and enable recording,
connect the digital equipment also by analog connection
to the VIDEO/AUX/DVD jacks (see below).
Ifthe video equipment does not have a digital out jack:
Connect the AUDIO OUT jacks of the video equipment to
the VIDEO/AUX/DVD jacks of this unit with an optional
audio connecting cord with RCA phono plugs (red plug
to the R jack, white plug to the L jack).
eWhen connecting an LD player via its AC-3 RF OUT
jack, use an RF demodulator to separate the analog
visual signals and the digital audio signals. Refer to the
Operating Instructions of the LD player.
Connect the television to the video equipment.
Refer to the Operating Instructions of the connected
equipment for details.
Connect the AC power cord to an AC outlet.
When the AC power cord is connected to an AC outlet for
the first time, DEMO appears on the display.
To deactivate the DEMO, press DEMO/ECO.
¢ Do not short-circuit the and © speaker cord leads.
¢Do not leave objects generating magnetism or objects
affected by magnetism near the speakers.