How to fix AJA PCI Card not capturing media from external device?
If media is not being captured from your desired external device with your AJA PCI Card, check the settings in the Input tab of the KONA 3 Control Panel application. Also, verify the equipment cables are properly connected.
Why AJA PCI Card disk RAID cannot keep up?
If your AJA PCI Card disk RAID cannot keep up (e.g., dropped frames), ensure the disk system is providing at least 50 MB/ second sustained transfer rate.
General| Brand | AJA |
|---|---|
| Model | KONA 4 |
| Category | Video Card |
| Language | English |
Describes AJA's software package, drivers, and control panel.
Outlines the recommended hardware and software for KONA operation.
Details the features of KONA 4 and 3G cards, including Video I/O.
Describes the audio input/output options for KONA 4/3G.
Describes 4K capture/playback capabilities.
Details features of the KONA LHe Plus card.
Details features of the KONA LHi card.
Introduces KONA IP for IP-based workflows.
Describes KONA 4/3G breakout cables and connectors.
Describes SDI, HDMI, and AES/EBU connectors for LHe Plus/LHi.
Describes SFP cages and modules for KONA IP.
Details the connectors for KONA IP.
Provides a summary of installation steps.
Discusses card placement recommendations for Mac and Windows.
Provides step-by-step instructions for MacPro installation.
Provides step-by-step instructions for Windows PC installation.
Explains how to make video and audio connections.
Illustrates system connections with diagrams and explanations.
Provides instructions for installing KONA software.
Explains how to use KONA with third-party software.
Introduces the AJA Control Panel software.
Describes the UI elements of the Control Panel.
Selects software conversion parameters (Mac only).
Explains how the Control screen directs video and output timing.
Shows current video format and allows changes.
Selects primary and secondary video formats.
Views input sources and maps audio channels.
Selects and views detected video input format.
Selects audio source and maps channels.
Defines parameters for receiving IP network inputs.
Defines parameters for sending IP network outputs.
Shows settings for both SDI outputs.
Details HDMI output options for 3G/LHi and input for LHi.
Shows settings for analog component/composite output.
Shows settings for analog video output.
Shows settings for analog audio output.
Controls how card behaves with third-party apps (Mac only).
Describes the downstream keyer functionality.
Specifies custom LUTs by creating and uploading files.
Selects timecode stream and monitors RP-188.
Inputs network parameters for KONA IP SFP cages.
Saves and manages configurations as presets.
Accesses firmware update/changeover screen.
Describes Quadrant mode for 4K capture/output.
Shows SDI inputs/outputs in 4K Quadrant mode.
Configures SDI connectors for 4K capture.
Selects Primary or RGB for 4K output.
Makes selections for Standard Mode with 4K format.
Makes selections for Standard Mode with 4K format.
Supports Two Sample Interleave for 4K/UHD up to 50 fps.
Explains how applications gain and relinquish control of the KONA output.
Provides guidance on troubleshooting system issues.
Lists detailed specifications for the KONA 4 card.
Lists detailed specifications for the KONA 3G card.
Lists detailed specifications for the LHe Plus card.
Lists detailed specifications for the KONA LHi card.
Lists detailed specifications for the KONA IP card.
Details the product warranty terms and conditions.
States AJA Video's liability limits for product use.
To Next Page
