Need help?Do you have a question about the AJA KONA 5 and is the answer not in the manual?
General| Category | Video Card |
|---|---|
| Interface | PCIe 3.0 x8 |
| Video Inputs | 4 x 12G-SDI, 1 x HDMI 2.0 |
| Video Outputs | 4 x 12G-SDI, 1 x HDMI 2.0 |
| Color Sampling | 4:2:2, 4:4:4 |
| Operating System Support | Windows, macOS |
| Power Consumption | 25W |
| Audio Inputs | 16 channels embedded audio via SDI |
| Audio Outputs | 16 channels embedded audio via SDI |
| Max Resolution | 4K at 60fps |
| Supported Resolutions | 2K, HD, SD, UltraHD, 4K |
| HDR Support | HDR 10, HLG |
| Bit Depth | 10-bit |
Provides a general overview of the installation process.
Guidance on selecting the best PCIe slot for installation.
Details the utility for system performance evaluation.
Illustrates typical system connections for KONA 5 in 4K Mode.
Illustrates typical system connections for KONA 4.
Illustrates typical system connections for KONA 1.
Instructions on where to download the latest KONA driver software.
Details firmware capabilities for KONA 5 and KONA 4.
Introduces the AJA Control Panel software.
Explains the two fundamental operating modes: Capture and Playback.
Describes the visual elements and navigation of the Control Panel.
Sets the default output when no application controls the card.
Routes selected input through for processing and capture.
Selects the main video format for the framebuffer.
Selects the video input source for the KONA card.
Picks the source of the audio input.
Settings for SDI output.
Sets output format parameters for SDI 1.
Sets output format parameters for SDI 2.
Settings for HDMI output.
Chooses between Auto, Primary, Secondary, or 4K Quarter output.
Configures progressive format and color space settings.
Prefers progressive (p) or PsF output over SDI.
Selects which two audio channels to monitor.
Selects which two audio channels to monitor.
Shows an example of the KONA 5 Audio Mixer screen.
Selects audio sources for playback monitoring.
Selects audio from the controlling application for playback.
Selects audio being input to KONA for monitoring.
Selects the operating mode for the downstream keyer.
Selects the type of LUT to apply (Auto, Linear, SMPTE, User).
Adjusts gain and offset for Red, Blue, and Green channels.
Timecode options.
Selects the RP-188 timecode source (LTC, VITC).
Instructions for saving and loading presets.
Detailed technical specifications for the KONA 5 card.
Detailed technical specifications for the KONA 4 card.
Detailed technical specifications for the KONA 1 card.
Details the warranty terms for hardware and storage modules.
Limits AJA Video's liability regarding product use and data.
To Next Page
