Need help?Do you have a question about the AJA KONA Series and is the answer not in the manual?
General| Interface | PCIe |
|---|---|
| Inputs/Outputs | SDI, HDMI |
| Operating System Support | macOS, Windows |
| Category | Video I/O Card |
| Video Inputs | SDI, HDMI |
| Video Outputs | SDI, HDMI |
| Audio Inputs | Embedded in SDI/HDMI, Analog |
| Audio Outputs | Embedded in SDI/HDMI, Analog |
| Bit Depth | 8-bit, 10-bit |
| Supported Frame Rates | 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps |
| Software Support | Adobe Premiere Pro, Final Cut Pro, Avid Media Composer |
| Supported Resolutions | Up to 4K/UltraHD |
| Audio Channels | Varies by model (typically 8 or 16) |
Provides contact methods (telephone, fax, web, email) for AJA support.
Details the specific features and capabilities of the KONA 5 card when used without a breakout cable.
Shows an example of the KONA 5 AJA Control Panel screen.
Shows an example of the KONA 4 AJA Control Panel screen.
Lists the minimum hardware and software requirements for KONA cards.
Introduces the features specific to the KONA 4 card.
Introduces the features specific to the KONA 1 card.
Introduces the features specific to the KONA 5 card.
Provides a general overview of the KONA card installation process.
Step-by-step instructions for physically installing the KONA card into a computer.
Guides on selecting the best PCIe slot for KONA card installation.
Instructions for uninstalling previous versions and preparing for installation.
Details the process of installing and reinstalling the AJA software package.
Step-by-step guide for updating the device firmware.
Introduces the AJA Control Panel software for configuring KONA hardware.
Explains the Control screen for selecting KONA output and timing configuration.
Shows and allows changing the current video format (Primary Format).
View and set video/audio input sources and map audio channels.
Configures the KONA card's SDI output signal parameters.
Configures the KONA card's HDMI output signal.
Configures the analog component or composite + Y/C output.
Adjusts settings affecting video input/output behavior and software interaction.
Configures current settings for analog audio output.
Selects and mixes audio to monitor during capture operations.
Selects and mixes audio for playback monitoring.
Adjusts LUT type, gain, and offset for color calibration.
Selects the timecode stream for applications and monitoring.
Saves and loads configurations as presets for quick recall.
Displays current firmware and allows updates.
4K transport settings for SDI output.
Mechanism to inform HDMI displays about HDR content.
Details the Control Panel Audio Mixer screens for KONA 4 in 4K Mode.
Selects the framebuffer's main video format.
Details the Capture and Playback Monitor tabs for mixing audio sources.
Configures the hardware downstream keyer for adding graphics.
Controls for creating and applying custom Look Up Tables (LUTs).
Lists technical specifications for the KONA 5 card.
Lists technical specifications for the KONA 4 card.
Lists technical specifications for the KONA 1 card.
General warnings and instructions before operating the device.
Warning about using only manufacturer-specified accessories.
Warning regarding polarized/grounding plugs and outlet compatibility.
Warning to protect the power cord from damage.
Instruction to use only qualified personnel for servicing.
Warning about mains plug accessibility for disconnection.
Instruction to disconnect AC power before moving the unit.
Details the limited warranty terms for hardware and storage modules.
Limits AJA Video's liability for damages related to the product.
To Next Page
