Function button
Selecting the function of the * button (Function
button):
Arm without code
The option allows you to arm the system
without entering a code. To do this, just click on
the Arm or Night mode button.
Unauthorized Access Auto-lock
When the option is active, the keypad is locked
for the pre-set time if an incorrect code is
entered more than 3 times in a row within 1
minute.
It is not possible to disarm the system using the
keypad during this time. You can unlock the
keypad through the Ajax app.
Auto-lock Time, min Selecting the keypad lock period after wrong
passcode attempts:
Learn more
Off — the Function button is disabled and
does not execute any commands when
pressed.
Alarm — operates as a panic button: after
the Function button is pressed, the system
sends an alarm to the security company
monitoring station and to all users.
Mute Interconnected Fire Alarm — when
pressed, disables the re alarm of
FireProtect / FireProtect Plus detectors.
This option functions only if Interconnected
FireProtect Alarms is enabled.
Learn more
3 minutes
5 minutes
10 minutes
20 minutes
30 minutes
60 minutes
90 minutes
To Next Page
Loading...
Need help?
General
