To Next PageTo Next Page
Need help?Do you have a question about the AJAX Fibra and is the answer not in the manual?
General| Communication protocol | Fibra |
|---|---|
| Material | Plastic |
| Backlight | Yes |
| Tamper protection | Yes |
| Compatibility | AJAX security systems |
Lists conditions where KeyPad Fibra should not be installed, such as obstructed areas, extreme environments, or outdoors.
Emphasizes selecting an optimal location meeting manual requirements and hiding wires for security.
Provides guidance on wire connection techniques like soldering, tinning, or crimping for reliable terminal connections.
Explains removing the mounting plate, running wires through channels, and leading them out from the keypad body.
Details connecting wires to terminals following polarity and order, and securing them with ties.
Details temporarily securing the mounting plate, powering up the hub, and the keypad's notification LED.
Instructs on conducting the Fibra signal strength test and attaching the SmartBracket mounting panel securely.
Details placing the keypad onto the mounted SmartBracket plate and securing it with a screw.
Ensures the hub is on, connected, disarmed, and the PRO app is set up with a compatible hub and virtual room.
Guides through manually naming, scanning QR code, selecting room/group, and adding the keypad via the PRO app.
Explains automatically adding devices by scanning connected bus devices and selecting them in the PRO app.
Details clicking a device, creating a name, specifying room/group, and saving the added device.
Lists common causes for malfunctions: temperature limits, tamper trigger (open body), and loss of connection via Fibra protocol.
Guides users to access and change keypad settings through the Ajax app's Devices and Settings menus.
Configure keypad name, room assignment, and group security management for personalized control.
Set arming/disarming methods, general keypad codes, and general duress codes for enhanced security management.
Configure Function button modes, arming without codes, and auto-lock behavior for enhanced security options.
Perform signal tests for optimal placement and manage temporary deactivation or access the user manual.
