AJAX Fibra - Mute Fire Alarm Function

For example: 2 → * → 4422 →
Mute Fire Alarm function
KeyPad Fibra can disable Interconnected FireProtect alarms by pressing the
Function button (if the corresponding setting is enabled). The response of the
system to pressing a button depends on the settings and the state of the
system:
Keep in mind that this function works only if Interconnected FireProtect Alarms
is enabled in the hub settings.
With the update, users can mute re detector alarms in their groups
without affecting detectors in the groups to which they do not have access.
Indication
KeyPad Fibra can report the current security mode, keystrokes, malfunctions,
and its status by LED indication and sound signal.
2. Enter the User ID.
3. Press the * (Function button).
4. Enter the personal duress code.
5. Press the disarming button .
Interconnected FireProtect Alarms have already propagated — the rst
press of the Function button mutes all sirens of the re detectors, except for
those that registered the alarm. Pressing the button again mutes the
remaining detectors.
Interconnected alarms delay time lasts — pressing the Function button
mutes the siren of the triggered FireProtect/FireProtect Plus detector.
Learn more
OS Malevich 2.12
Learn more