AJAX Fibra - Using a Duress Code; General Duress Code Usage; Personal Duress Code Usage

For example: 2 → * → 1234 → * → 5 →
If a group is assigned to KeyPad Fibra (in the Group management eld in the
keypad settings), you do not need to enter the group ID. To manage the security
mode of this group, entering a personal code is sucient.
Using a duress code
A duress code allows you to simulate alarm deactivation. The user will not be
exposed, since the sirens installed at the facility and the siren in the Ajax app
will not raise the alarm, but the security company and other users will be warned
of the incident. You can use both a personal and a general duress code.
Scenarios and sirens react to disarming under duress in the same way as to normal
disarming.
To use a general duress code
For example: 4321 →
To use a personal duress code
6. Enter the Group ID.
7. Press the Arm / Disarm / Night mode button.
What is Group ID
What is User ID
Learn more
1. Activate the keypad by touching any button.
2. Enter the general duress code.
3. Press the disarming button .
1. Activate the keypad by touching any button.