States
The states include information about the device and its operating parameters.
KeyPad Fibra states can be found in the Ajax app:
Parameter Meaning
Malfunction
Clicking on opens a list of malfunctions of
KeyPad Fibra.
The eld is displayed if a malfunction is
detected.
Temperature
Detector temperature — it is measured on the
processor and changes gradually.
Acceptable measurement error between the
value in the app and the room temperature: 2–
4°C.
The value is updated as soon as the detector
identies a temperature change of at least 1°C.
Fibra signal strength
Signal strength between the hub and KeyPad
Fibra. Recommended values — 2–3 bars.
Fibra — protocol for transmitting KeyPad Fibra
events and alarms
Learn more (in progress)
Connection via Fibra Status of the connection between the hub and
the keypad:
Learn more
1. Go to the Devices tab.
2. Choose KeyPad Fibra from the list.
Online — the keypad is connected to the
hub.
Oine — the keypad is not connected to the
hub. Check the wired connection.
To Next Page
Loading...
Need help?
General
