The keypad supports both general and personal duress codes. You can set a
personal code in the user settings. Each user sets this code individually.
Unauthorized access auto-lock
If a wrong code is entered three times within 1 minute, the keypad will be locked
for the time specied in the . During this time, the hub will ignore all
codes, while simultaneously informing users of the security system about an
attempt to guess the code.
An user or PRO with admin rights can unlock the keypad through the app. Also,
unlocking occurs automatically after the lock time specied in the settings
expires.
Two-stage arming
KeyPad Fibra can participate in two-stage arming. This process is similar to
arming with a personal or general code on a keypad. The process must be
completed either by re-arming using the SpaceControl second-stage device or
by restoring the second-stage detector (returning to its original position).
KeyPad Fibra cannot act as a second-stage device in two-stage arming
Fibra data transfer protocol
The keypad uses Fibra technology to transmit alarms and events. This is a two-
way wired data transfer protocol that provides fast and reliable communication
between the hub and the rest of the devices. Using the bus connection method,
Fibra delivers alarms and events instantly, even if 100 detectors are connected
to the system.
Learn more
settings
More on two-stage arming
To Next Page
Loading...
Need help?
General
