AJAX FireProtect 2 User Manual

FireProtect 2 (Heat/Smoke) malfunctions:
Maintenance
The detector has a self-test system and does not require the user or installer
intervention. The smoke chamber is protected from dust and insects, so there is
no need to clean it. We recommend running a periodically to familiarize
people with the alarm sound and LED indication.
FireProtect 2 devices connected to the Ajax hubs generally do not require routine testing.
All connected devices are constantly monitored for possible Faults, Low battery, and EOL
signals.
However, we encourage all users to test FireProtect 2 devices periodically (monthly)* to
allow residents of the building to become familiar with the re alarm signals of the
system.
*Please be aware that your local regulation might require more frequent testing (e.g.,
weekly).
Clean the detector enclosureof dust, cobwebs, and other contaminants as they
appear. Use a soft dry cloth suitable for equipment care. Do not use substances
that contain alcohol, acetone, gasoline, and other active solvents.
The service life of the detector is 10 years. After this period, the sensitivity of the
sensors decreases. We recommend replacing the detector with a new one to
ensure uninterrupted re protection at the premises.
The version of the detector with replaceable batteries (has RB in the name)
operates from pre-installed to detector batteries for up to 7 years. When the
batteries are discharged, replace them with new ones.
There is no connection with the hub or radio signal range extender.
The detector‘s enclosure is open.
Low battery charge level.
Hardware malfunction (failure of one or more sensors of the detector).
self-test

AJAX FireProtect 2 Specifications

General

Brand	AJAX
Model	FireProtect 2
Category	Security System
Language	English