AJAX FireProtect 2 User Manual

discharged. with replaceable
batteries only (has RB
in its name). A
detector with sealed
batteries (has SB in
its name) should be
replaced with a new
one after the batteries
are discharged.
The red LED ashes 5
times during the
smoke chamber test.
The siren beeps 5
times during the
smoke chamber test.
Performing a self-test.
The test can be
started by pressing
the
or in the Ajax
app in the detector
settings.
Detector testing
Functionality testing
The test allows you to check the status of the detector’s sensors. You can run it
in two ways: by pressing the detector Test/Mute button and in Ajax apps.
If the detector is in an alarm state, the self-test is not available.
To run the test using the Test/Mute button, press the center of the detector
front panel and hold it for 1.5 seconds.
To run the test in the Ajax app:
How to replace
FireProtect 2 RB
batteries
(Heat/Smoke)
Test/Mute
button
1. Open the Ajax app.

AJAX FireProtect 2 Specifications

General

Brand	AJAX
Model	FireProtect 2
Category	Security System
Language	English