AJAX FireProtect 2 User Manual

then go out. power button for 1
second.
Green, yellow, and red
LEDs light up at the
same time, then go
out in reverse order.
No.
Turning the detector
off.
To turn off the
detector, hold the
power button for 2
seconds.
The green LED is
permanently on.
No.
Connection to the hub
in progress.
The indication turns
off after the detector
connection to the hub.
The green LED ashes
6 times in a row.
No.
The detector has been
removed from the
hub.
The indication turns
on when the detector
receives information
that it has been
removed from the
hub.
The yellow LED
ashes 2 times in a
row every minute.
The siren beeps 2
times in time with the
LED indication every
minute.
Malfunction is
detected.
All malfunctions are
displayed in the
detector in
Ajax apps. Fields with
malfunctions are
highlighted in red.
If the detector needs
to be repaired, contact
our
.
The yellow LED
ashes once per
minute.
The siren beeps in
time with the LED
indication once per
minute.
Low battery charge
level.
You can replace
batteries in a detector
with replaceable
batteries only (has RB
in its name). A
detector with sealed
batteries (has SB in
its name) should be
replaced with a new
one after the batteries
are discharged.
The yellow LED
constantly ashes.
No. The battery is
completely
You can replace
batteries in a detector
States
Technical
Support
How to replace
FireProtect 2 RB
batteries
(Heat/Smoke)

AJAX FireProtect 2 Specifications

General

Brand	AJAX
Model	FireProtect 2
Category	Security System
Language	English