AJAX FireProtect 2 - Page 10

LEDs and the built-in siren of the detector can report alarms, as well as some
detector states.
LED indication Sound indication Event Notes
The red LED ashes
continuously.
The siren beeps in
time with the LED
indication.
Alarm by:
The detector stops
alarming as soon as
its sources are
eliminated.
Also, you can mute
the alarm by pressing
the
or in the Ajax
app.
The LED and sound
indications resume if
the source of the
alarm is still present
after the muting timer
(10 minutes) has
expired.
The red LED ashes
every 4 seconds.
No. Muted alarm.
The detector stops
alarming as soon as
its source is
eliminated.
The red LED ashes 2
times in a row.
No. Restore after alarm.
If the source of the
alarm is removed, the
detector is restored
automatically.
The yellow LED lights
up for 1 second.
No.
Tamper alarm.
The detector is
removed from the
SmartBracket
mounting panel.
The green LED lights
up for 1 second.
No.
The detector is
installed on the
SmartBracket
mounting panel.
Turns on when the
tamper is triggered.
Green, yellow, and red
LEDs light up in turn,
No. Turning the detector
on.
To turn off the
detector, hold the
smoke;
rapid temperature
rise;
temperature
threshold
exceeded.
Test/Mute
button