AJAX FireProtect 2 User Manual

getting within the eld of both blue and infrared LEDs at the same time. So that
situation does not cause a false alarm.
The HazeFlow 2 software algorithm also protects against false alarms. When an
alarm is detected, the algorithm additionally processes the data received from
the detector and conrms the alarm.
Heat sensor
Inside FireProtect 2, there are two built-in A1R-class thermistors that detect a
rapid temperature rise and temperatures exceeding the threshold. These
thermistors notify of alarms when a rapid temperature rise or a static
temperature in the range of +54 °C to +65 °C is detected.
FireProtect 2 reports a temperature exceeding the threshold as soon as its value
surpasses +64 °C. The detector reports a rapid temperature rise if the indicator
increases by 10 °C within 1 minute. If the temperature indicator rises rapidly by
20 °C or more, the detector signals immediately.
Inside FireProtect 2, there are two built-in A1R-class thermistors that detect a
rapid temperature rise and temperatures exceeding the threshold. These
thermistors notify of alarms when a rapid temperature rise or a static
temperature in the range of 129 °F to 149 °F is detected.
FireProtect 2 reports a temperature exceeding the threshold as soon as its value
surpasses 147 °F. The detector reports a rapid temperature rise if the indicator
increases by 50 °F within 1 minute. If the temperature indicator rises rapidly by
68 °F or more, the detector signals immediately./geo_show]
Test/Mute button
Тo activate the Test/Mute button, press lightly on the centre of the front panel
with your hand. Use a suitable item (mop handle) if you can’t reach up the
detector with your hand. Test/Mute is a mechanical button placed under the
front panel of the detector.
The button performs several functions:
In normal mode, it starts the .detector self-test

AJAX FireProtect 2 Specifications

General

Brand	AJAX
Model	FireProtect 2
Category	Security System
Language	English