AJAX FireProtect 2 User Manual

Interconnected Fire Detectors Alarms*
All re detectors of the FireProtect 2 product line support the Interconnected
Alarm feature. This feature activates the built-in sirens of all re detectors in the
system as soon as at least one of the re detectors has detected an alarm.
Sirens of FireProtect 2 detectors are activated within 20 seconds after an alarm
is detected. The sirens of and are activated during
the detector ping interval set in the Jeweller(or Jeweller/Fibra) settings, but no
later than 60 seconds after.
The detectors have different sound and LED indications of alarm
types to make it easier for users to distinguish between them. In case of
interconnected alarm, all FireProtect 2 detectors indicate exactly the alarm type
detected by the initiating detector. Instead, and
detectors noties all types of alarms with the same sound.
*The Interconnected Fire Detectors Alarm feature is not certied according to
AS3786:2014, EN 14604, or EN 50291.
Sending events to the monitoring station
The Ajax system can transmit events and alarms to the monitoring
app as well as the Central Monitoring Station (CMS) via SurGard (Contact ID),
SIA DC-09 (ADM-CID), ADEMCO 685, and other protocols. The list of supported
protocols is .
In case of an alarm, it mutes the detector alarm or of
all re detectors in the system for 10 minutes.
Interconnected Alarm
In case of a fault or low battery level it mutes the sound and LED indication
for 12 hours.
FireProtect FireProtect Plus
FireProtect 2
FireProtect FireProtect Plus
How to set Interconnected Fire Detectors Alarms
How to mute Interconnected Fire Detectors Alarms
PRO Desktop
available here
Which CMSs Ajax connects to

AJAX FireProtect 2 Specifications

General

Brand	AJAX
Model	FireProtect 2
Category	Security System
Language	English